USB 1.1 Speed is Fully Sustained with the use of this AC Adapter Version of USB Network Cable Extender with AC/DC Power Boost and Rebuild all Power at the end of the 200ft. Network Run. UL/FCC Listed AC Adapter Included. Extends any USB 1.1 device up to 200 feet away the computer.
This mini USB 1.1 extender extends any USB device including keyboard/usb serial adapters/scanners/POS devices, hard drives, Etc. up to 200 feet away from the location of your computer, eliminating the 17.5 feet distance limitation of USB. This mini USB Extender send and receive units use one CAT-5 (or Cat6)cable for extension and is optimized for applications where two devices, such as the keyboard and mouse, must be operated remotely. Category 5-cables to go with this device Starting from $9.06 for 75FT. Cable
How it works:
The mini USB Extender send unit is placed next to the computer. A USB cable connects the computer to the mini extender send unit. A category-5 (CAT-5) cable is used to link the mini USB Extender send unit to the mini USB Extender receive unit. The USB peripherals are connected to the mini USB Extender receiver unit. The USB Extender can even be used to extend surveillance cameras for security purposes.
- Mini USB 1.1 extender send unit
- Mini USB 1.1 extender receive unit
- 500ma DC Output AC Adapter
- Extends any USB device up to 200 feet (70 meters) using CAT5 cable
- Requires no external power adapter
- Saves time and increases productivity
- Can be usid with USB hub to drive Two Devices(max)
- Provides support for any full-speed 12 Mb/s or low-speed 1.5Mb/s USB device Use either PC or Mac with USB keyboard/mouse
- Range: 200feet (70 meters)
- USB device ports at receiver unit: 2
- USB device support: Full-speed 12 Mb/s Low-speed 1.5 Mb/s
- AC to DC adapter is provided to Boost all USB Power at the end of the Channel up to 500ma
- USB Send Input Connectors: USB Type B
- USB Send Output Connectors: RJ-45
- USB Receive Input Connectors: USB Type A
- USB Receive Output Connectors: RJ-45
- Power Supply: 300 mA when sender is supplied with 500 mA 600mA when sender is supplied with 1000 mA
- Dimensions Sender: 4" W x 2.8" H x .5" D
- Dimensions Receiver: 4" W x 2.8" H x .5" D
- Temperature Range: 4°C to 40°C
- Shipping Weight: 1 lbs.
Note: Specification is subject to changes without notice.