This USB to Serial RS 232 DB9 adapter 765288 fully supports Windows, Mac, & Linux:
- Windows 10
- Windows 8
- Windows 7
- Windows Vista x64
- Windows XP x64
- Windows Server 2003 x64
- Windows Vista Windows XP
- Windows Server 2003
- Windows 2000
- Mac OS X (Intel)
- Linux 2.6+ newer (integrated into kernel, no driver needed!)
- Windows CE.NET (ARM/XScale Processor)
- Windows CE.NET (x86 Processor)
New USB 2.0 Serial Adapter with Built in Drivers for XP and 2003 and New Windows Vista!. Ultra Compact Mini USB 2.0 Serial RS-232 Adapter cable for NoteBook and Laptop Users. Mini Adapter has one Status LED and uses FTDI Chip for up to 230K Speed. Converts a USB port into a 9-pin male RS-232 serial port capable of speeds up to 230,400 bps.
This USB Serial FTDI-based adapter converts a USB port into a serial port capable of speeds up to 921,600 bps.
Designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB COM 765288 instantly adds a serial communication port to your system. By taking advantage of the USB bus, this product makes it easier than ever to add serial ports and serial devices to your system with easy plug-and-play and hot plug features. Plugging the USB COM 765288 into the USB port, the adapter is automatically detected. There are no IRQ & COM port conflicts since the port doesn't require any additional IRQ, DMA, or memory as resources on the system.
The 765288 provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a high speed serial communications port.
Features & Specifications:
- Easy plug-and-play installation
- Installed as a standard COM port
- Full modem control signals & data signals supported
- Serial port speed up to 921,600 bps
- 384 byte receive / 128 byte transmit buffering.
The 765288 supports Windows 98, ME, 2000, XP, 7, 8 and Windows 10, Apple MAC OS8 or higher, Linux 2.4.0 and later, OpenBSD 2.9 and later & FreeBSD 4.7 and later. Drivers for the Windows operating systems are included on a CD-ROM disc. The latest versions of the Windows drivers as well as the drivers for Apple OS8/OS9/OSX, & Windows CE.NET (version 4.2 or greater) can be downloaded from http://www.ftdichip.com/Drivers/FT232-FT245Drivers.htm.
Linux, OpenBSD and FreeBSD support the adapters directly, so no driver is necessary.
- Power/RX/TX LED's Built-In, easy installation using provided Widows Drivers by FTDIchip.com
- Detachable Cable Standard A to A Extension cable Lenght up to 15ft.(2ft cable provided)
- The USB Serial Adapter is designed to make serial port expansion quick and simple.
- Installed as a standard Windows COM ports, Full RS-232 modem control signals, RS-232 data signals; TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
- USB Extension cable of 2 feet included
- Powered by USB port
- Supports Windows 98/SE, ME & 2000, Windows 2003 and Windows XP
The USB Serial Adapter provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a High speed and or LOW serial communications port.
Changing the COM Port Number With the release of V1.02.07, FTDI has introduced a properties sheet which allows the user to change the COM port number of a USB serial port. From DeviceManager, select "View devices by type", then "Ports (COM & LPT)". Select the USB serial port and click Properties. Select the "Port Settings" tab, then click Advanced. Choose the required COM port number from the list and click OK. Notes If a modem is attached to the USB serial port when the port number is changed, it will continue to work under the new port number. If a modem had been attached to the USB serial port but was not attached when the port number was changed, it will not work when re-attached under the new port number. In this case, the modem must be removed from the system and re-installed. In general, if there are devices in the system which have been attached previously to the USB serial port, they may not work after the port number has been changed. If this is true, remove the device from the system and re-install it.
Important Technical Information:DB-9 Pin assignment
Pin1 : DCD <== IN
Pin2 : RXD <== IN
Pin3 : TXD ==> OUT
Pin4 : DTR ==> OUT
Pin5 : GND
Pin6 : DSR <== IN
Pin7 : RTS ==> OUT
Pin8 : CTS <== IN
Pin9 : RI <== IN
ITEM USES FTDI CHIP USB to
Serial Adapter RS-232 Serial Port to
USB The USB to Serial adapter
(converter) from CaqbleMAX lets you
use a serial PDA, GPS, cell, etc. with
a standard USB port.
Item Uses Industrial Grade FTDI
FT232BM Chip, for more information
and driver support for this chip please
USB Type A Male 9-pin Serial Male
Adapter Direct USB to Serial Plug
2 feet (extension cable provided)
Bus Powered (no external power
Windows 98 SE, ME,
2000,2003,XP,Linux (Does NOT
support Mac or DOS) Pentium
233MHZ or faster 64 MB RAM or
more Available USB Port
Other Technical Info
Ultra Fast FTDI Chip!
Supports RS232 serial interface
Works with USB 1.1 & 2.0 ports USB
suspend condition Supports 500 kbps
transfer rate Advanced 16 Bit
processor for USB transaction and
control data processing
This adapter is the easiest way to
add a serial port to your computer.
Many PDAs, digital cameras, GPS
units, barcode scanners, and other
equipment require a serial
connection, and many newer
computers don't have serial ports.