eSATA Dual Type "I" PCI Bracket with type "L" Cable Ends
SUPER SALE ON TRUE SATA II eSATA External PCI Style Bracket SATA I and SATA II compatible up to 300 MB/s
SATA Dual Internal to eSATA Port Adapter Bracket External Dual SATA II Port PCI Bracket Cable Various Cable Lengths from 13.5 cm to 35.5 cm. Connect an external Serial ATA hard drive through a standard expansion slot. Converts your Internal SATA I port to an SATA II external connection at the PCI bracket Click for larger image External SATA II Dual Port PCI Bracket The CGS-PCIBRKT-135CM Internal to External SATA II PCI bracket will fit in any standard PC expansion slot. It basically allows you to connect an external SATA hard drive to your computer. The external port connects to the disk enclosure, and the internal SATA cables can be attached to any SATA controller or SATA ready motherboard installed on your PC.
SATA II PCI Bracket Features: Provides 2 external SATA II connection to SATA device. 13.5 cm in length (5.31 inches) Supports 1.5 GBps Data Transfer Rate. Convert Internal SATA I port to External SATA II connection at PCI bracket Supports (2) Serial ATA device Specifications: System: For Host Systems with 2 internal SATA Ports. Serial ATA Ports: Compatible with SATA ports on mother boards or add in cards. Compliant with Serial ATA 1.0 and 2.0 Specifications Cable Support: Supports (2) external SATA Device NOTE: OS Transparent, depends on the Host Support The Serial ATA dual port PCI Bracket installs into your PC as you would install any other PCI related card or bracket. However, the cable ends of the PCI bracket need to connect to either the SATA enabled mother board or SATA controller card within your PC. Clicking the image on the left will present a larger view of the SATA II ports and an outline of the connector port. Because this is a dual port SATA PCI bracket, two available internal SATA port connections must be available to enable both ports on the bracket. Both ports however are independent of each other meaning if there is only one available SATA internal connector to connect to, then only one of the SATA PCI bracket ports would function. This allows an external SATA device connection to be made from an internal source (the PCI controller card) by connecting the cable end of the single port SATA I or SATA II PCI bracket to the controller cards internal female connection.