1 (727) 209-1300 | Mon-Fri 9a-5p ET

Product Image
  • Product Image Thumbnail

FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) bridge board featuring initio inic-2430L

Part # FWB-IDE01
$74.98
Discontinued

Bulk Pricing

Qty: 1+
$74.98

Qty: 3+
$67.77

Qty: 6+
$63.22

Compatibility

FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) bridge board featuring initio inic-2430L

Part #FWB-IDE01
Product Image
  • Product Image Thumbnail
Discontinued

Bulk Pricing

Qty: 1+
$74.98

Qty: 3+
$67.77

Qty: 6+
$63.22

Compatibility

Overview

Firewire 800 SCSI mount Dual Drive support Firewire 1394b 2X9-pin Ports external 1X internal Daisy Port. This is a retro fir for all dual bay scsi and firewire enclosures(it will bolt up to stnadard centronnincs oppening)

FWB-IDE01 
FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) Bridge Board featuring INITIO inic-2430L FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) Bridge Controller and Texas Instrument's new IEEE 1394b 800Mbps PHY (TSB81BA3)

AVAILABLE MODEL:

  • FWB-IDE01-2 (With Two external Biligual Connector)
  • FWB-IDE01-3 (With Two external and One internal Biligual Connector)

INTRODUCTION

FWB-IDE01 is ideally suited for tailgating interfaces such as removable-media drives CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, tape drive, and hard disk drive. It allows IDE drives (Master and Slave) to be connected to FireWire 800 (IEEE 1394b) serial bus in a plug-and-play fashion.  Both ATA and ATAPI devices are supported using the same firmware.

FWB-IDE01 allows users to easily hot-swap IDE drive without interrupting the current operation. 
FWB-IDE01 provides the perfect solution for data backup and transferring of data between computers using IDE (ATA/ATAPI) devices.

FEATURES

  • FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) Bridge Board:
  • IDE (ATA/ATAPI) Interface: Male IDC 2X20 Connector
  • Both ATA and ATAPI devices are supported using the same firmware.
  • Number of ports: External X 2 (Biligual-9pin) and Internal X 1 (Biligual-9pin).
  • 1394a PHY: Ti's TSB81BA3 IEEE 1394b 800Mbps PHY
  • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
  • FireWire (IEEE-1394) to ATA Native Bridge Controller: initio inic-2430
  • Complies with T13's ATA/ATAPI-7 Draft Specification:
    • PIO Mode 0-4
    • DMA Mode 0-2
    • Ultra DMA Mode 2, 4, 5, 6
    • Supports 48-bit addressing for large hard drives (>128GB).
  • Physical Dimensions: 3.33" x 1.81" (8.45cm x 4.60cm)
    Fit to most standard SCSI enclosure. (SCSI I 50pin Connector Form Factor)

APPLICATION - To turn your SCSI enclosure into FireWire enclose

  • FWB-IDE01 was designed to have SCSI 1 50pin connector form factor so it's idea for dual bay SCSI case
  • End user can upgrade their SCSI enclosure to FireWire800 (1394b) enclosure. 
  • SCSI Enclosure vendors using the ATA/ATAPI devices now have an immediate and no-risk solutions for adding FireWire800 (IEEE 1394b) interface to their product lines. 

BENEFITS

  • End user can replace a slow & expensive SCSI device with a cheap & fast EIDE device. 
  • This allows peripheral vendors a unique opportunity to continue the advantage of the ATA/ATAPI existing market advantages while presenting FWB-IDE01 into the rapidly expanding FireWire800 (IEEE 1394b) markets. 

KIT INCLUDES

  • FWB-IDE01 Bridge Board
  • Ultra DMA100 Cable 18 inch for two devices (Master & Slave)
  • Y-Shape DC Power Cable (Red, Black, Black, Yellow)
  • Installation Guide
READ MORE

Specifications

Manufacturer: -- Warranty: ONE YEAR Availability: Discontinued
Barcode: FWB-IDE01 Ship Weight: 2.00 lbs Condition: New
Part Number: FWB-IDE01 Color: BLUE Size: SCSI MOUNT

Specifications

Manufacturer: --
Barcode: FWB-IDE01
Part Number: FWB-IDE01
Warranty: ONE YEAR
Ship Weight: 2.00 lbs
Color: BLUE
Availability: Discontinued
Condition: New
Size: SCSI MOUNT