Pre-Sales Support: 1-888-688-2188
 |
| Discover card not excepted |
|
The DK-6-2B
Black 1394 Firewire dual bay enclosure. Connecting
IDE hard drive sizes from 200-320 GB to a 1394
firewire serial bus technology with Plug and
Play capabilities!
|
DK-6-2B
(black) is ideally suited for tailgate interface applications
for removable-hard disk drive. It allows IDE drives to
be connected to a 1394 serial bus in a plug-and-play
fashion.
DK-6-2B Dual Bay 5.25" w/ Two Mobile Rack: FireWire to IDE Enclosure
(w/Master/Slave support up to 2X320GB IDE 3.5" Hard Drives) |
Dual
bay 1394 firewire hard drive enclosure, hard drive
not included. |
 |
$189.98
|
|
Compatibility/Requirements/Disclosures
- Available Power Outlet
- Available IEEE 1394a/1394b (400) Port
- 3.5-inch IDE/ATA
Drives (Any ATA 33/66/100/133 or Higher 5.25" Hard Drive)
*Tested With IBM, Maxtor,WD,Samsung up to 320GB Capacity!*
Low Profile Case (6.5 Tall X 7.2 WIDE X 13.1 Long) |
The
DK-6-2B (black) Firewire dual bay enclosure features a
sleek design and
will work only with drives that support ATA-6 up to 320
GB.
- Two 5.25-inch Drive
Bays (removable)
- Two IDE/ATA Connector (Can be Used w/ Internal or External IDE Drives)
- Two External IEEE 1394 Firewire Ports, Transfer speeds up to 100/200/400 Mbps
- LBA 48 bit
addressing - use any size hard drive(tested with WD 200GB/250GB/Maxtor200GB/250GB/300GB/320GB)
- Plug and Play/Host Swapping capability
- 2X Removable Trays
- Power
is auto switching 90-264 AC A 50/60Hz
- Supports: Windows 98SE, Me, 2000, XP - MAC OS X.2 or higher
|
Includes: case, driver CD, power cord, one 1394 cable, mounting
screws
and supports most types of IDE storage devices |
|
$189.98
|
The Kit Includes: DK-6-2B
enclosure, AC Power Cord (2.0m length), 6pin-to-6pin FireWire
cable (1.0m length), 2X Removable Trays and a 1-YEAR WARRANTY |
Specifications
of the The DK-6-2B Firewire dual bay enclosure
- Plug and Play/Host Swapping capability
- Two FireWire (IEEE 1394) 6pin Connector in the rear panel
- Built-in 80W power supply/Universal auto-switching 90-240V AC
- Built-in 80x80 mm cooling fan
- Low Profile Case (6.5 Tall X 7.2 WIDE X 13.1 Long)
Operating System Requirements:
- Windows 98 SE/ME/2000/XP A
- pple FireWire driver set 2.3 or later
- Apple MacOS 9.1 or later
|
 The
enclosure tray itself is easily removed and replaced
when needed, just lift the handle and a slight pull. When
replacing the tray and the handle is lowered into position,
the connection is made between the enclosure and the
hard drive.
Along with the bay cooling fan itself, the drive
trays also have a 80x80mm cooling fan to ensure an
excellent air flow and cooling
system.
The Hard drives are mounted and connected easily
into the dual bay removable tray without interference
from the inner cooling fan. Just
power, ribbon and 4 screws take care of the mounting.
When replacing or removing the trays in or out of
the bays, the bay must be unlocked.
The drive within the tray will not function unless
the tray is locked (see tray locks to the right).
|
|
$189.98
|
|
|
