USB 2.0 to IDE & SATA
Kit - TECHNICIANS CHOICE
Connect a Hard Drive or CD ROM to your USB port This adapter is the advanced version of our popular USB 2.0 to IDE Bridge Kit, because it includes the ability to connect any IDE or SATA drive without installing it inside the computer.
What all does it connect? USB Drive Bridge for IDE/SATA connects to the most common drive types:
* 3.5" SATA * 3.5" IDE/PATA * 2.5" (notebook) SATA * 2.5" (notebook) IDE/PATA
It connects via USB2 to your computer, allowing you to access the drive and contents.
A low cost way to connect your drives Our bridge has two options for power: the included AC adapter or you can also use a 4-wire connector from the desktop computer\'s power supply, if it\'s more handy.
Status Lights A power status LED verifies that the unit is switched on or off. Another LED indicates that the the bridge is accessing the drive, and another confirms that a valid USB connection is established.
Why should I buy this? This particular unit is geared toward technicians because of it's many capabilities.
High Speed USB 2.0 Technology We\'ve incorporated the same high speed technology as in our other USB 2.0 bridges. That means, up to 480Mbps transfer rate.
Setup in 30 seconds 3 easy steps. 1.) Plug the drive into the adapter 2.) Plug the power into the drive 3.) Plug the USB adapter into your computer
Universal Drive Adapter implements a bridge between USB port and IDE or SATA 3.5" internal Hard Disk Drive
Cablemax USB to SATA and IDE Adapter Cable Box with UL Listed and FCC Aproved Power Adapter.
2.5" IDE Drives (Hard Drives)
3.5" IDE Drives (Hard Drives)
5.25" IDE OPTICAL Drives (DVD CDRW Drives)
SATA Hard Drives and Optical DVD-CD Drives
2.5" SATA I and SATA II Drives (Hard Drives)
3.5" SATA I and SATA II Drives (Hard Drives)
5.25" SATA I and SATA II OPTICAL Drives (DVD CDRW Drives)
1. USB to IDE/SATA/eSATA Adapter Cable
2. SATA Hard Drive Cable
3. UL/FCC Power Adapter 3A Total Power
4. Molex to SATA 15 pin Power Adapter
5. CD Rom Software for Backup XP/Vista Only