|Compatible with Windows operating systems
for a USB 2.0 16' long Repeater Cable? Click the following
link to purchase Model GM-800-5M at $19.98
Setup Configuration, No Driver Installation, No IRQ
Conflicts...Just plug your cable(s) into the 16 foot
USB Repeater Cable and you're
ready to GO!
Typical USB Extension Cable Configuration
The above diagram is
a representation of how the USB repeater cable functions.
The USB Repeater Cable Model
Shown here is The USB Repeater Cable model
GM-500-5M 16' long.
USB Repeater Cable is not a passive extension cable.
It's an active device allowing you to extend other
USB cables. The USb signals going in and out of the
extension cable are bufferd to assure signal quality
and the meeting of the USB Electrical and Timing Specifications.
Using passive cables for the purpose of extension
will result in signal errors and is not recommended.
The USB Repeater Cable allows a USB
device to have its cable length extended by up to
an additional 40
to 80 ft. By connecting 8 and 16ft. cables in a serial
fashion, The USB Repeater cable acts as a transparent
USB hub and buffers both downstream and upstream data
traffic. Both Low and High speed devices will function
as well as if they were directly connected to a USB
Port with the USB Repeater Cable.
Repeater Cable Specifications
USB Transceivers Cable Prevents Signal Lose
Supply Current Drawn
Typical current less than 3mA
Cable Voltage Drop
an GND Wire Size
Pair. 90 )hm Charactristic Impedance
wrap foil w/28AWG drain wire and copper mesh over foil.
used w/High Speed Peripheral
used w/Low Speed Peripheral
Storage Temp. Range
- 4 0
Repeater Cable Close Up
is the female end of the USB Repeater Cable and the
brains of the operation. This is what deligates the
USB signal when connecting several USB repeater cables
in series or connecting one peripheral USb cable to
the repeater. The standard USB cable length is about
5 meters, the USb repeater cable or data extension
cable as it is sometimes called does as it's name
implies and extends or repeats the length of the standard
usb cable, or the length of data signal to its destination
peripheral or hub. This particular cable is 16 feet
and SIMPLE! All you have to know about USB is how
to plug it into your USB Port and the repeater takes
care of the rest. I tested this with my PhotoSmart
printer and it's 5 meter cable. I was in the living
room and the printer in the kitchen, about 20 feet
away. I very simply connected the female end of the
repeater to the USB printer cable and the male end
to my laptop, printed a document in no time flat just
as if I was connected directly to the printers USB
cable. This opens up possiblities for me as I work
out of my living room.
This is a home office must and will certainly allow
you more options when it comes to setting up a home
office with your USB peripherals. I would certainly
recommend this product to those who need to extend
thier USB cable and signal.
Bob Boisvert...Web Professional
USB 2.0 Extension Cable up to 80FT.
usb extension cable
usb extension cord
usb port extension
usb 2.0 extension cable
usb active extension cable
2 cable extension usb
USB Extension Cable via Category 5 network cable up to 150FT.
USB Line Extender USB Longe Range Extension Calbe
SUPER BOOSTER USB EXTENDER
Pocket-sized, it boosts the distance of your USB device up to 150ft
USB LONG RANGE UPTO 150FT EXTENSION ADAPTERS A Male to TYPE A Female
Click to Order USB LONG RANGE UPTO 150FT EXTENSION ADAPTERS A Male to TYPE A Female
Cat5 Active Repeater
USB CAT5 Active Repeater for Up to 150ft Extend your USB peripherals up to 150ft using regular CAT5/5e/6 RJ45 cable.
This repeater cable has built-in buffer & actively regenerates the signals to preserve data integrity. Includes transmitter and receiver modules.
(Connectors: Transmitter with Built-in 1ft USB Cable - USB A Male to RJ45 Female; Receiver - USB A Female to RJ45 Female) Interconnect Cable Length: Up to 150 (45.75) Feet (Meter)
Embedded USB Transceivers at both ends to prevent signal loss.
Many USB devices will work with cable lengths up to 200 feet. However, this is not guaranteed and each device must be tested separately for proper operation if the interconnect cable length exceeds 150 feet. Also, with interconnect cable lengths longer then 150 feet, no intermediate hubs are allowed
Equivalent Hub Delays:
50 Foot Unit 1.5
100 Foot Unit 3.0
150 Foot Unit 5.0
Hubs The maximum number of series Hubs in any USB connection is five (5). This includes any standard USB Hubs in the connection, and the equivalent Hub rating of any Active USB Cable.
Supply Current Drawn: 20.0 mA Typical operating current @40C. The repeater does not support the USB 500 uA Maximum Suspend Current limit. If this is a requirement then an external power supply must be used.
The supply must power the Base unit in this case
Operating Temperature Range: 0 - +40 C
Storage Temperature Range: -40 - +85 C
USB Transceiver Specification Meets USB Specifications Downstream Connector Female Type A USB Approved Connector
Upstream Connector Male Type A USB Approved Connector
Base To Host Cable Length 1 (0.3) Feet (Meter)
Regulatory Testing FCC Class B
Interconnect Cable Standard Cat 5/5e/6 Network Cable, 4 twisted wire pairs, #24 AWG wire.
USB Extension Cables USB 1.0 and USB 2.0
SUPER Long Range USB Device Cable 36ft. A to B Amplified Signal Cable for Windows And Mac Users
This Cable will Run Between Any USB 2.0 Device and a Host Computer up to 36ft. Away, Item Uses Standard A Male Port to Connect to Host Computer and Standard B Plug to Connect to any AC Powered USB Device. This Cable Amplifies All Signal So there is no Signal Loss even at 36ft. There is one Limitation, USB Device that Plugs into this Super Long USB Extension Needs to Be AC powered(Plugs into the wall, does not draw power form USB port). That is it, Need to Extand your Printer, Scanner, Digital Photo Frame, Etc. up to 36ft. Away, This item will do the trick!
NOW WORKS WITH VISTA! 98SE/ME/2000/2003/Vista/XP and MAC OS9.1 up to X.5
Product Features: - USB 2.0 specification compliant. - Data transfer rate up to 480Mbps. - True Plug and Play. - No external power require. CE and FCC Approved.
USB 2.0 Active Extension Cable by CABLEMAX
Unlike passive extension cables, the USBG-36AB 2.0 Certified Active Extension Cable (using GL-850 chip) is an active device that buffers the data going in and out to assure that signal always meets the USB 2.0 Electrical and Timing Specifications.
THis can be used to extend the cable length of any USB 2.0 device. This USB active cable acts as a transparent USB 2.0 Hub Therefore there is no drivers required!
Extends and boosts the signal to any USB device supports data transfer speeds up to 480 Mbps
Built-in repeater helps maintain Hi-Speed USB 2.0 signal quality, electrical and timing specifications
Overcomes the 5 m (16 ft.) USB distance limitation ideal for connecting most USB printers
Provides a single, nondaisy-chainable extension for maximum distance of 11 m (36 ft.)
Plug and Play; Windows and Mac compatible bus-powered requires no external power supply
Power is delivered using 22AWG Wires and Signal Is boosted using HUB ASIC Chip to Full USB 2.0 High-Speed Specification over 28AWG Wires
USB 1.1 and Hi-Speed USB 2.0 compatible
A male to B male
Windows 98/Me/2000/XP and Mac compatible
Cable length, 11.0 m (36 ft.); 432 g (15.2 oz)