1 (727) 209-1300 | Mon-Fri 9a-5p ET

Product Image

FireWire 800 IDE bridge board Oxford 912

Part # CGS-1U3FI
$55.00

Bulk Pricing

Qty: 1+
$55.00

FireWire 800 IDE bridge board Oxford 912

FireWire 800 IDE bridge board Oxford 912

Part # CGS-1U3FI
Product Image
$55.00

Bulk Pricing

Qty: 1+
$55.00

FireWire 800 (IEEE 1394b) & USB 2.0 Combo to IDE (ATA/ATAPI) bridge board featuring Oxford OXFW912 FireWire 800 (IEEE 1394b) to IDE Bridge Controller and NEC D720133GB USB 2.0 to IDE Bridge Controller

New CoolGear Oxford 912 RAID IDE(PATA) Dual Drive Bridge Board with Firewire 800 and Firewire 400 ports. *USB 2.0 Port is Disabled in RAID Firewire Mode.

  • Item Can be used with any IDE (PATA) Hard Drive from 80GB up to 500GB X 2 in RAID 0 Configuraton.
  • Item Can also function as a Single Device Controller for One IDE(PATA) drive up to 500GB in USB 2.0 and Firewire 800/400 Mode RAID 0 Striping BUILT-IN, Can be disabled VIA firmware Utility! RAID 0 - Disk Striping With RAID 0, or a configuration known as "data striping", data is written in sequential sections across more than two drives. RAID 0 is easy to implement, and it can dramatically improve performance. Several drives can be accessed at once, minimizing the overall "seek" time of larger files. This configuration has no data redundancy and therefore no protection against data loss, however, so it should not be used for business-critical applications. Oxford 912 CoolGear Firewire Bridge Board> FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) bridge board featuring Oxford OXFW912 FireWire 800 (IEEE 1394b) to IDE Bridge Controller  INTRODUCTION  CGS-1U3FI is ideally suited for tailgate interface applications for removable-media drives CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, tape drive, and hard disk drive.  It allows two IDE drives (Master and Slave) to be connected to FireWire (IEEE 1394) serial bus in a plug-and-play fashion.    CGS-1U3FI allows users to easily hot-swap IDE drive without interrupting the current operation.  CGS-1U3FI provides the perfect solution for data backup and transferring of data between computers using IDE (ATA/ATAPI) devices.  FireWire 800 (IEEE 1394b) to IDE (ATA/ATAPI) Bridge Board:  DC Power Connector: with mini 4-pin Floppy Disk Drive power connector  IDE (ATA/ATAPI) Interface: Male IDC 2X20 Connector  Both ATA and ATAPI devices are supported using the same firmware.  FireWire Bus Power: Self Powered Mode Operation  FireWire ports: Two Bilingual  1394b PHY: Ti\'s TSB81BA3 IEEE 1394b 800Mbps PHY  1394 Bus Transfer Rate: S100/S200/S400/S800 Mbps  Power indicator LED and HDD Access LED  FireWire 800 (IEEE-1394b) to ATA Native Bridge Controller: Oxford OXFW912 Complies with T13\'s ATA/ATAPI-6 Draft Specification: - PIO Mode 0 ~ 4 - Multiword DMA Mode 0 ~ 2 - Ultra DMA Mode 0 ~ 6 - Supports 48-bit addressing for large hard drives (>128GB).  Form Factor: SCSI I 50pin Low Density Centronics Connector Form Factor. Fit to most standard SCSI enclosure.  Physical Dimensions: 8.45cm (W) x 4.96cm (H) x 2.00cm(D)  HARDWARE REQUIREMENTS  Desktop PC: with either a built-in FireWire (IEEE-1394) controller or a FireWire (IEEE-1394) to PCI Host Adapter equipped with a external FireWire (IEEE 1394) port.  Laptop PC: with either a built-in FireWire (IEEE-1394) controller or a FireWire (IEEE-1394) to CardBus PC Card equipped with a external FireWire (IEEE 1394) port.  COMPUTER PLATFORMS:  Windows and Mac  OPERATING SYSTEMS REQUIREMENTS  Windows 98 Second Edition  Windows ME  Windows 2000  Windows XP  MacOS X or higher  KIT INCLUDES:  <li>CGS-1U3FI Bridge Board   <li>Ultra DMA133 Cable 18 inch for two devices (Master & Slave)   <li>Bilingual-to-Bilingual FireWire 800 Cable 3ft.length   <li>Y-Shape DC Power Cable (Red, Black, Black, Yellow)     <h2>ULTRA FAST RESULTS on 2 X 400GB IDE Seagate Drives RAID 0 Setup on Win Xp 2.4ghz.</h2>  SiSoftware Sandra  Benchmark Results <Drive Index : 58 MB/s</b>  Performance Test Status Run ID : QCUSA-F06F0408F on Monday, August 15, 2005 at 11:43:36 AM SMP Test : No Total Test Threads : 1 SMT Test : No Dynamic MP/MT Load Balance : No Processor Affinity : No Operating System Disk Cache Used : No Use Overlapped I/O : Yes IO Queue Depth : 4 request(s) Test File Size : 768MB File Fragments : 1 Block Size : 1MB File Server Optimised : No  Benchmark Breakdown Buffered Read : 60 MB/s Sequential Read : 68 MB/s Random Read : 47 MB/s Buffered Write : 61 MB/s Sequential Write : 60 MB/s Random Write : 41 MB/s Average Access Time : 6 ms (estimated)  Drive Drive Type : Hard Disk Total Size : 373GB Free Space : 369GB, 99%  Performance Tips Notice 5008 : To change benchmarks, click Options. Notice 5004 : Synthetic benchmark. May not tally with \'real-life\' performance. Notice 5006 : Only compare the results with ones obtained using the same version! Notice 5209 : Consider using the Removable Storage/Flash Benchmark for Flash devices. Tip 5202 : Use cache on to measure Windows performance. Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.                   </div>
                  <!-- <div class=READ MORE
  • -->

    Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help. Please refrain from spam, we only log this information to our database for 24-hours and then it's gone.

    Please be as detailed as possible with your description. The more complete your information is the faster we can return an answer.

    Specifications

    Manufacturer: -- Warranty: -- Availability: Limited Stock
    Barcode: -- Ship Weight: 55.00 lbs Condition: New
    Part Number: CGS-1U3FI Color: -- Size: --

    Specifications

    Manufacturer: --
    Barcode: --
    Part Number: CGS-1U3FI
    Warranty: --
    Ship Weight: 55.00 lbs
    Color: --
    Availability: Limited Stock
    Condition: New
    Size: --

    User Reviews

    Product Rating:
    (0 reviews)
    No Reviews, be the first to leave one.

    LAST 4 REVIEWS

    VIEW ALL REVIEWS