1 (727) 209-1300 | Mon-Fri 9a-5p ET

Product Image

NetCOM 1613RM PRO 16 ports secure serial device server

Part # NetCOM1613RM

NetCOM 1613RM PRO 16 ports secure serial device server

NetCOM 1613RM PRO 16 ports secure serial device server

Part # NetCOM1613RM
Product Image

NetCom 1613 PRO is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to a network running TCP/IP.

NetCom 1613 PRO provides completely secured communication for configuration and to the attached serial device.In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port.

NetCom 1613 PRO can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.


Controls 16 RS232/422/485 device located virtually anywhere

via Ethernet or Internet Secure encryption on Ethernet

Lan interface 10BaseT/100BaseTx Ethernet

Driver automaticlly finds NetCom devices in the network

Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP

Automatic mode switching between Driver and Raw Mode Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS

Supports ART (Automatic Receive Transmit control)

RS232/422/485 interface selectable by Switches and Software



Processor ARM 9 166 MHz

I/O controller 16C950 or compatible

Memory 16MB SDRAM, 2 MB Flash

Connector type RJ45 for Ethernet,

DSUB 9 male for serial Port


Ethernet interface Auto-detecting 10BaseT/100BaseTx

Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS

Serial interface RS232/422/485 selected by software or DIP-switch

No. of port 16, Speed up to 3.6 Mbps

Available Modes RS232 full duplex

RS422 full duplex

RS485 4 wire, full duplex

RS485 2 wire, half duplex, with echo

RS485 2 wire, half duplex, without echo


RS422 Tx+/-, Rx+/-, GND

RS485 2 wire Data+/-, GND

RS485 4 wire Tx+/-, Rx+/-, GND

RS485 Data control Controlled by ART (Automatic Receive Transmit control) or RTS


Speed RS232: up to 921.6 kbps

RS422/485: up to 3.6 Mbps

Parity None, even, odd, space, mark

Data bits 5, 6, 7, 8

Stop bits 1, 1.5, 2

IRQ None

I/O address None

Operating Modes

Driver mode VScom Driver for Windows NT 4.0, 2000, XP, 2003 and Vista

Driver Mode creates virtual Com port

TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections

TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections

TCP Advanced Settings Special settings for user-defined modes

UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. Timeout functionality, maximum packet size and a configurable trigger string define the packets of incoming data to send over UDP.

Null Modem Tunnel Connecting two NetCom used as virtual null modem cable

IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers. Windows "INF"-Driver provided for installation.

Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix- systems

Power and Environment

Power requirements 100 - 240V AC 47-63 Hz, 25VA

Dimension 492 x 147 x 44 mm (W×L×H)

451 x 152 x 46 mm with DB9 connector & DIN rail mounting kit

19" 1HU Rackmount

Operating Temp 0°C - 55 °C

Storage Temp -20°C - 85°C

Case SECC sheet metal (1mm) Weight 2.7kg

Special Features

Installation Configuration utility automatically finds NetCom devices in the network

Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used

Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP

SNMP special VScom MIB included

ART Automatic Receive Transmit control for RS485

DNS Domain Name Server support

Serial interface Serial Interface configurable with DIP switch and by software

Firewall Special precautions for Firewall environments Firmware Firmware update over WEB Browser, Telnet, ComPort

LEDs LEDs for Power, serial Tx, Rx, Ethernet Link, Speed

Security Password access Every capabilities of configuration use the same password including SNMP V3

Secure communication OpenVPN tunnel provides security on Ethernet. The tunnel protects the configuration as well as all serial data. It is also usable across the Internet. Strong encryption by AES up to 256 bit keys


EMC FCC Class A, CE Class A Environment RoHS Back to Top

Ordering Information

Art.No 678

Product Name NetCom 1613RM PRO

Packing list . NetCom 1613RM PRO

. Power cord

. 19" mounting kit

. CD-ROM with Driver and configuration software . Printed Quick Installation Guide

Optional Accessories . DK 35A - DIN-Rail mounting kit

Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help. Please refrain from spam, we only log this information to our database for 24-hours and then it's gone.

Please be as detailed as possible with your description. The more complete your information is the faster we can return an answer


Manufacturer: VSCOMGear Warranty: -- Availability: Discontinued
Barcode: -- Ship Weight: 12.00 lbs Condition: New
Part Number: NetCOM1613RM Color: Beige Size: --


Manufacturer: VSCOMGear
Barcode: --
Part Number: NetCOM1613RM
Warranty: --
Ship Weight: 12.00 lbs
Color: Beige
Availability: Discontinued
Condition: New
Size: --

User Reviews

Product Rating:
(0 reviews)
No Reviews, be the first to leave one.