PCIex-800E 8-Port RS-232 PCI Express Serial Board The PCIex-800E PCI Express 8-Port RS-232 Card is the most advanced Multiport Serial Board with PCI Express Bus. The board is PCI Express x1 compliant, and works in any PCI Express slot (x1, x4, x8 and x 16 lane PCI Express slots). This x1 lane, standard profile PCI Express serial board offers eight reliable, high speed ports of RS-232 connectivity, compatible with any PCI Express slot. There is no need to change your application software. The new PCI Express system is backwards compatible with your PCI card software. The PCIex-800E PCI Express 8-Port Serial Board is designed with a DB-62 male connector on board, and one octopus cable fanning out eight DB9 male connectors. The board is equipped with eight 16C950 UART. Each port supports up to 128 bytes of transmit and receive FIFO buffers. Each of the PCI Express RS-232 serial port supports data rate up to 921.6 Kbps, with automatic data flow control to ensure no data loss. The PCI Express serial ports support full modem control signals, to ensure compatibility with a wide range of serial peripherals. This PCIex-800E offers reliable, high speed data transfer for your PCI Express system. Complete drivers support Windows Vista, XP, 2003, 2000. Features & Specification Model No.: PCIex-800E Supports four RS-232 ports Bus interface: 3.3v PCI Express Bus signal support I/O Address & IRQ: Assigned by BIOS. Plug & Play. PCI Express x1 lane compatible Works in PCI Express x1, x4, x8, x16 slots Installed as standard Windows COM port Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, GND UART: 16C950 UART FIFO: 128 byte transmit & receive FIFO, with automatic flow control Serial port speed up to 921.6K bps Full hardware and software flow control Serial Communication Parameters -Parity: None, Even, Odd -Data bits: 5, 6, 7, 8 -Stop bits: 1, 1.5, 2 -Flow control: RTS/CTS, XON/XOFF Easy plug & play installation and RS-232 device connection Dimensions: 91 mm x 71 mm COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Supports Windows Vista, XP, 2003, 2000. Connection Cable (standard) Octopus RS-232 cable with DB62 connector fanning out 8 DB9 connector Cable length: 100 cm
Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help. Please refrain from spam, we only log this information to our database for 24-hours and then it's gone.