Our RS-422/485 Serial to Ethernet Device Server solution SG-1PE Network Serial Server 1S RS422/485 to Ethernet Adapter Provides 1 RS422/485 Port over Ethernet Provides 1 DB9 RS422/485 Male Connector 1 5-pin Terminal Block RS422/485 Connector RS422/485 Speed from 300bps to 115.2Kbps Provides one 10/100Mbps, RJ45 LAN Port Supports Setup and Connect Passwords Supports Standard Windows Socket Protocol Provides TCP Server, TCP Client, and UDP Built-in Watch Dog Feature +7~12VDC DC Jack Power Input Connector Wall Mounting Holes and Optional DIN-Rail Kit Supports Virtual COM Port Drivers INTRODUCTION The SG-1PE 1-Port RS422/485 to Ethernet Adapter is designed to adopt your industrial serial devices to the Internet instantly. It delivers simple, reliable and cost-effective network connectivity for serial devices. It addresses the need to connect individual RS422/485 devices, such as PLCs, meters, sensors, to an IP-based Ethernet LAN. It makes your application software to access serial devices anywhere on a local area network or the Internet. A built-in watch dog function is designed to reset the SG-1PE when the hardware hangs because some other unknown causes. The SG-1PE is easy to install or remotely through a variety IP addressing methods (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP-Ping). It is ideal for applications requiring serial port environments and network device management. SPECIFICATIONS Ethernet Port: Ethernet: 10/100 Mbps, RJ45 connector Protocols: UDP, IP, TCP, ICMP, HTTP, DHCP, ARP-Ping Serial Interface The Serial interface provides 1 DB9 RS422/485 connector. The key benefits are: Supports 4-Wire RS422 Mode and 2-Wire RS485 Mode RS422/485 Connector: DB9 male and Terminal Blocks Parity: None, Even, Odd Data bits: 5,6,7,8 Speed: 300bps to 115.2Kbps Wall Mounting Holes and Optional DIN-Rail Kit Supports Virtual COM Port Drivers Watch Dog Function A built-in watch dog function is designed to reset the SG-1PE when the hardware/software hangs because some other unknown causes. Power Requirements +7~12VDC from DC Jack Power Input Connector or 2-pin Terminal Blocks Other Available Models: Model # Isolation and Surge Protection PoE (Power over Ethernet) SG-1PEPOE No Yes SG-1PEIS Yes No SG-1PEISPOE Yes Yes Environmental: Operating Temp.: 0 to 55¨C (32 to 131¨F) Storage Temp: -20 to 85¨C (-4 to 185¨F) Operating Humidity: 5 to 95% RH Form Factor 5.78¡¨(L)x2.60¡¨(W)x1.04¡¨(H) (14.70 x 6.63 x 2.65 cm)
Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help. Please refrain from spam, we only log this information to our database for 24-hours and then it's gone.