eSATA 4-Ports RAID PCI Card for Windows 2000/2003/ XP and VISTA!
Serial ATA External 4 Ports and RAID 0, RAID 1, RAID 0+1, RAID 1+S(Mirrored-Sparing) to your system Item Uses SIlicon Image Chip SIL3114r for All Version of Vista 32 and 64 bit. SATA Raid Card for Windows Vista! FEATURES Four shielded and durable eSATA external connectors 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Four high speed Serial ATA interface ports, each supporting Serial ATA data rates 1.5Gb/s (tested with SATA I and SATA II Drives up to 1,000GB) Hot-plug capability Fully compliant with Serial ATA 1.5G specifications (works with SATA I and SATA II Hard Drives) Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on two drives RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed Supports ATAPI commands Supports Spread Spectrum in receiver Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes Compliant with PCI Specification, revision 2.2 Integrated PCI DMA engines Four Pin header on board for LED connection 32 bit, 33/66MHz fully compliant PCI host interface Supports Windows 98, Millennium, NT 4.0, 2000, XP, 2003 and Linux, Novell Netware Acts as NON-RAID when BIOS not configured RAID
|Barcode:||--||Ship Weight:||1.00 lbs||Condition:||New|
|Ship Weight:||1.00 lbs|