Sata Multiplexer Hardware RAID 0/1/10 and JBOD Support *(this item does not support Raid 5) 1-to-5 Native SATA2 Port Multiplier Provides an eSATA host and 5 eSATA Device Connectors Built-in Silicon Image SiI4726 Chip, supports FIS-based and command-based switching SATA host controllers. Advanced data aggregation architecture for ultra-fast read and write operations with FIS-based switching controllers. High-speed, native SATA connection to host and devices. Provides link and activity LED connectors. Provides a DC Jack for DC Power Input AC Mini 5V Adapter Provided Supports 1.5Gbps and 3.0Gbps with auto-negotiation Link to SiliconImage for More Information on 4726 Chip and Software setup Compatibility Charts http://www.siliconimage.com/docs/DOC-002000-451_SteelVineCompatibility_REV_3.pdf INTRODUCTION The SS-4726HUB 1-to-5 native SATA2 Port Multiplier is designed to provide a high performance link between a single SATA2 host port and 5 SATA device ports. It expands one upstream SATA2 port to 5 downstream SATA2 ports. With its unique data aggregation and 3Gbps serial link capacity, it supports 5 SATA or SATA2 devices with auto-negotiation features over one single eSATA connector and supports both 3Gbps and 1.5Gbps devices automatically. It is able to take full advantage of 3Gbps host link bandwidth and FIS-based switching host controllers by bundling together data from device ports and sending it over the 3Gbps host link. The SS-3726HUB is designed for optimum performance and expandability. With its hot-plug and hot-swap features, it is an ideal upgrade solution to support SATA and SATA2 devices for the rapidly changing data to preserve user¡¦s investment in the SATA interface. SPECIFICATIONS Serial ATA Interface 1 Upstream to 5 Downstream SATA2 Ports Supports External eSATA Connectors One DC Jack for External Power Input Supports FIS-based and Command-based Switching Methods Asynchronous Notification to Eliminate the need for Host Polling to Determine if a Device has been added, removed and hot-plugged. Supports Serial ATA devices with up to 1.5Gb/s or 3.0Gb/s Transfer Rate Serial ATA Devices Supports 5 Serial ATA devices: Hard drives, Removable HDD, and more coming devices such as CD-ROM, CD-R, CD-RW, Tape, IOMEGA, LS-120, DVD-ROM, PD, ¡K I/O Hardware Provides 1 Upstream and 5 Downstream eSATA Connectors. Supports One DC Jack for Power Input. OS Support Depends on the Upstream Host Controller. It is transparent from the Operating Systems. Environmental Specifications Operating Temperature: 0 to 55aC (32 to 131aF), 10% to 90% relative humidity (non-condensing) Storage Temperature: -40 to 75aC (-40 to 167aF), 5% to 95% relative humidity (non-condensing) Form Factor 5.90¡¨(L)x2.61¡¨(W)x1.02¡¨(H) (15.00 x 6.65 x 2.60 cm)
Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help. Please refrain from spam, we only log this information to our database for 24-hours and then it's gone.