Please take a look at our new USB to IDE adapter as IOI products do not work and IOI technology is going out of business. U2-IDE02 (Direct Connect Vertical Type) USB 2.0 to EIDE bridge board featuring Cypress CY7C68300-56PVC (USB 2.0 to ATA/ATAPI Native Bridge Controller) IDE (ATA/ATAPI) Interface: Female IDC 2X20 Connector USB 2.0 Interface: One USB B-type-4pin Connector Physical Dimensions: 2.36" x 1.34" (6.00cm x 3.40cm) INTRODUCTION U2-IDE02 implements a fixed function bridge between one USB port and one ATA or ATAPI based mass storage device port. This bridge adheres to the Mass Storage Class Bulk-Only Transport specification and is intended for self-powered devices. The USB port of the U2-IDE02 is connected to a host computer directly or via the downstream port of a USB hub. Host software issues commands and data to the U2-IDE02 and receives status and data from the U2-IDE02 using standard USB protocol. The ATA/ATAPI port of the U2-IDE02 is connected to a mass storage device. A 4Kbyte buffer maximizes ATA/ATAPI data transfer rates by minimizing losses due to device seek times. The ATA interface supports ATA PIO modes 0, 3, and 4, and Ultra DMA modes 2 and 4. The device initialization process is configurable, enabling the U2-IDE02 to initialize ATA/ATAPI devices without software intervention. FEATURES Complies with the USB-IF specifications for USB 2.0, the USB Mass Storage Class, and the USB Mass Storage Class Bulk-Only Transport. Operates at High (480Mbps) or Full (12Mbps) speed. Uses one external serial EEPROM containing the USB device serial number, vendor and product identification data, and device configuration data. Support for ATA/ATAPI devices configured either as master or slave. ATA/ATAPI Interface Supports: Complies with T13\'s ATA/ATAPI-6 Draft Specification: - PIO Mode 0, 3, 4 - Ultra DMA Mode 2, 4 - Supports 48-bit addressing for large hard drives (>128GB). - It translates ATAPI SFF-8070i commands to ATA commands for seamless integration of ATA devices with generic Mass Storage Class BOT drivers. Self Powered Mode Of Operation Operating System Support: Windows 98 SE/ Me/ 2000/ XP; MacOS 8.6 or later DESCRIPTION Only one key device onboard * USB 2.0 to ATA/ATAPI Native Bridge chip: Cypress CY7C68300 Enables quick penetration of USB 2.0 markets Complete backward compatibility Leverages ATA/ATAPI peripheral economies of scale Allows use of existing peripheral software applications Provides cost-effective solution for remote location of peripheral devices User friendly interface - Plug&Play and Ease of use Enables hot swappable peripherals APPLICATION - To turn your ATA/ATAPI Device to USB 2.0 Device This allows peripheral vendors a unique opportunity to continue the advantage of the ATA/ATAPI economies of scale while presenting U2-EIDE02 into the rapidly expanding USB 2.0 markets. End users using USB 2.0 interface now have an immediate and no-risk solution for adding ATA/ATAPI devices to their computer. BENEFITS Enables quick penetration of USB 2.0 markets Complete backward compatibility Leverages ATA/ATAPI peripheral economies of scale supports both ATA and ATAPI devices by using the same firmware. Allows use of existing peripheral software applications Provides cost-effective solution for remote location of peripheral devices User friendly interface - Plug&Play and Ease of use Enables hot swappable peripherals
Sometimes you need a product in a flash and just want to verify an item is in stock. Other times you have a specific question regarding a product, shipping method, or your order. Use the form below and we will help. Please refrain from spam, we only log this information to our database for 24-hours and then it's gone.