4 Port USB 3.2 Gen 1 Micro Powered Hub PCBA w/ GL3590 Chipset & ESD Surge Protection
$63.99
**Notice: This product is presently in a development phase and is exclusively suggested for purchases in quantities of one to two (1-2) to confirm proper operation within integrated system before ordering full quantity. Design specifications may change without prior notice.
+7~14V DC Input | Surge Protection | 5 Gbps
- Protect Your Equipment: The 4-port hub features 15kV ESD surge protection to keep your connected peripherals safe from harm.
- Super Fast Speeds: This USB hub is 3.2 Gen 1 compliant, ensuring super-fast 5Gbps data transfer speeds. It supports super speed, high speed and full speed which enables it to be compatible with USB 2.0 / 1.1.
- Chipset: GL3590
- Upstream: 1 USB port, Type C connector
- Downstream: 4 USB ports, Type A connectors
- Power Connector: DC Barrel 2.5mm ID × 5.5mm OD, Center Pin Positive
Availability:
Loading availability info...
Model Number
CG-3590X4AX1C-PD-PCBA
Introduction:
USB 3.2 Gen 1 powered micro hub PCBA. The CG-3590X4AX1C-PD-PCBA is a +7~14V DC input, USB 3.2 Gen 1 hub PCBA with ESD and Surge protection. Each port is protected individually to help keep your peripherals safe. This hub uses a CCG3 PD Cypress chip, each port is on an individual circuit to maintain high current and protection.
Features:
- USB PD 3.2 Gen 1 compliant hub capable of providing power to UFP and DFP ports
- CCG3 PD "Cypress" chip inside
- 4 Downstream ports supporting Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
- +7~14V DC variable voltage input
- PD compatible provides advertisement of Single PDO , 5V 3A output on UFP port so it can power low current Mobile devices (tablets/cellphones)
- Independent ESD protection for each port on all Data Lines for USB 2.0 and USB 3.0 (including input port)
- All signal lines with integrated rail-to-rail clamping diodes for downstream ESD protection of ±15kV exceeding IEC 61000-4-2, level 4
- Independent Current/Over Voltage and Under voltage Protection for all 4 DFP A ports
- Input Power DC jack TVS protected to 16V
- Isolated GND for Shield Connectors
- Tantalum and MLCC capacitors throughout design for extended temperature range and duty cycle
Package Contents:
- USB 3.2 Gen 1 4-Port Micro Hub PCBA
| Model Number | CG-3590X4AX1C-PD-PCBA |
|---|---|
| UPC | 045079164444 |
| Color | Black |
| Manufacturer | Coolgear |
| OS Compatibility | OS independent - No software or drivers required |
| Country of Origin | China |
| Material | N/A |
| Upstream Port Count | 1 |
| Upstream Port Type | USB 3.2G1 / 3.0 Type-C Female |
| Downstream Port Count | 4 |
| Downstream Port Type | 4x Type A USB 3.2 G1 / 3.0 |
| Max Data Transfer Rate | 5 Gbps |
| Input Voltage | 7 ~ 14V DC |
| ESD Protection | 15KV |
| Chip Model | GL3590 |
Write Your Own Review
