NetUSB-100iX4 USB Device Server 10/100/1000 Mbps

The NetUSB-100iX4 is a network-enabled USB Server for connecting USB devices over the 10/100/1000 Mbps Ethernet network running TCP/IP. By adding this USB to Ethernet Server to LAN, you can network-enable the USB device. It breaks the traditional five-meter USB cabling distance limitation. By this implementation, USB devices connected to NetUSB-100iX4 can be made available to remote clients over LAN- without a locally attached host PC.

The NetUSB-100iX4 provides a simple and convenient way to extend a USB device over long distances and allows for sharing that USB device with multiple users over Ethernet Network.

NetUSB-100iX4 Device Server Features:

• Supports wide input power range: DC9V~DC48V
• Extends USB cabling distance beyond five meters
• Compatible with USB 2.0 specification and backward compatible with USB 1.1
• Allows USB devices to be used and shared by client PCs over LAN
• Supports wide variety of USB devices
• Connects up to 4 devices using an additional USB Hub (not included)
• Provides Plug-n-Play and hot-swap functions same as on board USB port
• Access and monitor USB devices over a user-friendly application interface

• The NetUSB-100iX4 USB to Ethernet Server provides:
• RJ45 Ethernet to 1 USB 2.0 port
• Allows USB Devices to be used and shared by client PC's over LAN
• USB 2.0 High Speed Ports up to 480 Mbps speed
• Full 500 mA power provided to USB port
• Connects up to 4 devices using an additional USB Hub (not included)
• Supports wide variety of USB devices
• 10/100/1000 Mbps Ethernet support
• Supports IP addressing: Static and DHCP
• LEDs for system/ Ethernet status
• Field-upgradeable firmware
• Supports “Reset” button for system reset
• Supports “Default” button for configuration to default setting
• Input power range: DC9V~DC48V
• Compatible Windows XP/ 2003 Server/ Vista/ Windows 7/ Windows 8
• Regulatory approvals: FCC Class B (DoC) and CE
• RoHS compliant

Hardware Restore Factory Default Button located inside the housing:

The NetUSB-100iX4 USB server supports a Hardware Factory Default button to restore the default settings (like IP Address). You will need to open up the case. When the NetUSB-100iTX is powered on, press the factory default push button for 5 seconds. It will restore the default settings for the NetUSB-100iX4 USB Server.

Hardware Reset Button

The NetUSB-100iX4 USB server supports Hardware Reset Button to reset the hardware. When the Hardware Reset Button is pressed for a short duration, it will reset the NetUSB-100iX4 USB server system.