USB to RS-422 Adapter W/Terminal Block Changer (FTDI CHIP)

USB to RS-422 Adapter W/Terminal Block Changer
USB to RS-422 adapter provides an extra Serial Com port via USB connection and can be configured to work with RS-422 peripherals such as POS and Industrial Control devices. USB Plug and Play feature supports an easy serial port expansion and requires no IRQ, DMA, or I/O port resources. 
USB adapter features a full set of RS-422 data and control signals on its DB-9 or terminal block Changer. It supports data transfer rates of up to 3M baud. No external power supply is required as USB adapter takes its power from the USB bus.
Features:

• Full compliance with the USB Specification 2.0 & 1.1
• Support 256 Node on the network
• ±15kV HBM ESD Protected
• Data Transfer rates 300 to 3M baud.
• Supports remote wake-up and power management
• Compatible Windows 98SE / ME / 2000 / XP / Vista / 7 / 8 and higher, Windows Server 2003 / 2008 / 2008R2 , Win CE and Mac OS 8.6 , Linux 1.5.0 and higher. 
• Changer adapter from DB-9F to 7 Pin Terminal block

Chip    FTDI
Data Transfer Rate    3M baud
Power Consumption    56mA
LED    3
Environment    Operating Temp.    0 ℃ ~ 40 ℃
    Storage Temp.    -20 ℃ ~ 60 ℃
    Humidity    0~80% RH, Non-condensing
Compliant    USB spec. 2.0 / 1.1
Interface    RS-422
Connector    Host    USB Type A Male
    Device    DB-9M / DB-9F to Terminal Block
Power Mode    Bus
Housing    Plastic