Loading...

ChargeIt! Mini 200W Dual Type-C PD Charger PCBA 100W Output

$59.99

Industrial Grade | +24~28V DC Input | Over Voltage & Current Protection | PCBA

  • Simultaneous Charging: Charge 2 laptops, tablets, phones, or other USB-charged in charge mode devices, while the built in PD chipset dynamically detects devices to deliver optimum power level for maximum battery life and performance.
  • Quick Charging: Provides up to 200W of combined charging.
  • PPS: Programmable power supply capability allows for small step-wise changes in voltage, current, and for constant current charging (with gradual voltage increase), followed by constant voltage charging (with gradual current reduction).
  • Downstream: 2 USB Type-C PD Ports
  • Power Connector: 2-Pin Terminal Block
  • LED Indicators: Power
Availability: In stock
Model Number
CG-PD200DS-PCBA
  • Buy 6 for $59.09 each and save 2%
  • Buy 12 for $58.64 each and save 2%
  • Buy 24 for $57.89 each and save 4%
  • Buy 48 for $57.44 each and save 4%
  • Buy 99 for $56.39 each and save 6%

Introduction:

This High Power Dual Port USB Type-C Industrial PCBA complies with the latest USB-C and PD standards. Intended for use in PC power adapters, mobile chargers, car chargers and power bank applications. This charger board provides two 100W USB Type-C PD ports for a combined 200W of charging.

Specifications:

  • 200 Watt Buck-Boost Dual Type-C PD 3.0 100x2
  • Supports output line compensation function to get stable output voltage
  • Synchronous-rectified Buck-Boost converter
  • Supports multi-protection on input: Over voltage, under voltage, output over current, and short circuit protection. ESD Surge protection of 4kV.
  • Input voltage range: 24~28V ( 22min ~ 30V Max)

Type-C and PD Protocol:

  •  Support 5V/9V/12V/15V/20V output
  •  Support PD2.0/PD3.0(PPS) protocol
  •  Support 3.3V-21V, 20mV/step PPS
  •  Support E-MARK cable

Fast charge output

  •  Support Type-C and PD protocol
  •  Support BC1.2 and Apple protocol
  •  Support QC2.0/ QC3.0/ QC3+ protocol
  •  Support FCP/SCP protocol
  •  Support AFC protocol
More Information
Model Number CG-PD200DS-PCBA
UPC 045079163874
Color Black
Manufacturer Coolgear
Warranty 1 Year
OS Compatibility OS independent - No software or drivers required
Country of Origin China
Material FR-4 Glass Fiber
Short Description

Industrial Grade | +24~28V DC Input | Over Voltage & Current Protection | PCBA

  • Simultaneous Charging: Charge 2 laptops, tablets, phones, or other USB-charged in charge mode devices, while the built in PD chipset dynamically detects devices to deliver optimum power level for maximum battery life and performance.
  • Quick Charging: Provides up to 200W of combined charging.
  • PPS: Programmable power supply capability allows for small step-wise changes in voltage, current, and for constant current charging (with gradual voltage increase), followed by constant voltage charging (with gradual current reduction).
  • Downstream: 2 USB Type-C PD Ports
  • Power Connector: 2-Pin Terminal Block
  • LED Indicators: Power
Upstream Port Type Type C
Downstream Port Count 2
Downstream Port Type 2x Type C (Charging)
Max Data Transfer Rate N/A
LED Indicators Port Status, Power
Input Voltage 24V DC
Chip Model IP6559
Write Your Own Review
You're reviewing:ChargeIt! Mini 200W Dual Type-C PD Charger PCBA 100W Output
Your Rating