USB to 5v TTL Header Like FTDI TTL-232R-5V - Supports Windows 11

This 5 volt USB to TTL level Serial UART adapter allows you to connect your computer through a USB port and use it as a standard serial communication. USB protocol is handled from within this adapter. There is no other device or programming required.

The USB to 5V TTL Header adapter is perfect for embedded systems that require a serial connection to a computer. The board attaches directly to the USB bus via a standard type A receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically convert to USB and back to Universal Asynchronous Receiver/Transmitter (UART) on your target board.

USB to 5V TTL Header Cable Features

• The Cable provides a USB to TTL Serial interface to 6-pin header.
• Single board USB to asynchronous serial data transfer interface
• Entire USB protocol handled by the electronics in the cable USB
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
• Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking.
• Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
• +5V output allows external logic to be powered from the USB port
• Transmit and receive LEDs
• UHCI / OHCI / EHCI host controller compatible
• Low USB bandwidth consumption.

OS Support:

• Windows XP, Vista, 7, 8, 10, 11
• Mac OS X
• Linux

Packages Contents:

• GM–TTL5VT USB to 5V TTL Header Cable
• Latest FTDI Driver
• GM-TTL5VT Product Manual (digital, on driver disk)