65ft. Active USB 2.0 Extension Cable - 5VDC Power Booster

Windows Approved USB 2.0 Active 65ft. Extension Cable with Power Booster

The USBG-ex65ftAC uses a USB 2.0 Hub Controller IC (FE1.1) Multiple Transaction Translator (MTT) architecture. Low power consumption -- less then 60mA High-Speed downstream ports (in idle state). Terminus FE1.1USB 2.0 High Speed Hub Controller USB-IF Certified: TID: 30000018 Windows Vista/7 Approved: ID 1283259

This USB 2.0 Extension Cable is with a 5VDC Power Booster for powering high power devices. the extra power aides in giving clarity of USB 2.0 Data Signal for full speed device communication.

USB A to A Extension Cable for Extending Cable Lenght of All USB Devices such as; USB Cameras, USB Printers, USB Hard Drives, USB Adapters, USB Switches, USB Scanners, USB Everything. 65 ft extension cable with a built-in active repeater Chip for USB 2.0 signals. With a maximum transfer rate of 480 mbps, this cable is a great way to transfer data over unusually long distances. It features a male USB connector on one side and female on the other and so works perfectly as an intermediary between cable runs.

This cable is Type-A Male to Type-A Female; Foil and Braid Flexible 26/22AWG USB Shielded High Speed Cable 2.0 Revision 26AWG/1P+22AWG/2C AWM 2725 80c 30V VW-1 E156135 RoHS

Active USB 2.0 Cable Features

• 22-gauge high performance power wires ensure maximum USB performance.
• Exceeds all USB specifications.
• Provides for high power consumption devices
• Molded strain relief and PVC overmolding to ensure a lifetime of error-free data transmissions.
• Supports up to 127 devices on a daisy-chain configuration
• HotPluggable.
• Flextec™ cable jacket is extremely flexible for use in tight areas.
• Gold plated copper contacts provide maximum conductivity and minimizes data loss.
• Foil and braid shield complies with fully rated cable specifications reducing EMI/RFI interference.
• Impedance matched twisted pair construction helps to minimize cross talk, ensuring high-speed, error-free transmission.
• Undermold shield helps to prevent radio frequency and electro-magnetic Interference (EMI/RFI). Hood shielding eliminates antennae excitation.