USBGear USB 2.0 Active USB Extender Cable A to B extends and boosts the signal to any USB device and supports data transfer speeds up to 480 Mbps. Has a built-in repeater to help maintain Hi-Speed USB 2.0 signal quality. The USB extender cable provides a single, non-daisy-chainable extension for maximum distance of 11 m (36 ft.)
Long USB Extension Cable Buy two or three, stack them together for up to 80ft. total cable run. Certified High-Speed Shielded Cable 28/20AWG E188601-U (UL) Type CM 75c LL84201 CSA Type. USB Type-A male to A-female certified active USB extension cable.
Effortless & Driverless Windows 7 Data Transfer Cable USB 2.0 High Speed Transfer Your Documents in Minutes, ALL NEW ThunderBird Link for Windows 7 (32/64 bit) Vista(32/64 bit) XP/2000.
USB Extension Cable extends the length of your USB device cable to your hub, PC, or Mac. Perfect for devices with short cables. Fast, 480Mbits/sec transmission speed.
USB 2.0 Active Extension Cable extends the length of your USB device cable to your hub, PC, or Mac. Perfect for devices requiring higher power consumption and signal quality.
The USB to USB Direct / NetLink Bridge cable provides driverless Host-to-Host linking solution for two or more USB hosts of PC or Notebook. Designed with a proprietary power-saving technology and auto detecting and switching method.
The 6ft. A right angle to B right angle cable keeps a low profile connection to both host and device port for USB 2.0 data activity. A great cable for connecting printers and scanners to your system via an A to B connection.
1ft. Very Short USB 3.0 Device Cable Black A to B Super-Speed USB 3.0 Device cable (A-B) offers a durable, high quality connection that harnesses the full capability of the USB 3.0 standard. Designed to comply with USB 3.0 specifications and superior quality.
3ft.Long USB 3.0 Device Cable Black A to B Super-Speed USB 3.0 Device cable (A-B) offers a durable, high quality connection that harnesses the full capability of the USB 3.0 standard. Designed for next-generation Super-Speed USB device configurations.
6ft.Long USB 3.0 Device Cable Black A to B Super-Speed USB 3.0 Device cable (A-B) offers a durable, high quality connection that harnesses the full capability of the USB 3.0 standard. Designed for next-generation Super-Speed USB device connections
Best Quality Fully Shielded and Molded 3ft. Long USB 3.0 Device Cable Black A to Micro B SuperSpeed USB 3.0 Micro B Device Cable cable (A male to B Micro) offers a durable, high quality connection.
Short 24-inch USB Extension Cable USB Connector Type A Male to Type A Female. USB Extension Cables USB A/A Extension Cable; 2ft Black with Hi-Quality Mold. This is a simple 24inch USB Extension Cable Soft Flexible cable type A to Type A Female.
Short, pure white 24-inch USB Extension Cable USB Connector Type A Male to Type A Female. USB Extension Cables USB A/A Extension Cable; 2ft White with Hi-Quality Mold. This is a simple 24inch USB Extesnion Cable Soft Flexible cable type A to Type A Female.
FTDI Unique 10ft. USB to serial adapter cable with screw style db-9 male connector and shielded 10ft. long USB cable that uses the FTDI Chip it also has three color LED display.
Low Profile A Connector USB 2.0 Device Cable White. 6ft. UltraFlex A Rigth Angle to B Straight, certified USB 2.0 High-Speed Device cable works with all USB 1.0 and USB 2.0.
Easily connect a USB device to your PC or Mac with this 10' USB device cable. Foil and braid shield reduces EMI/RFI interference while 28 gauge signal wires ensure maximum signal integrity Twisted-pair.
Compliant with USB 2.0 high speed specification this 7 port hub is surge protected through all ports and included a Din rail mounting kit for additional mounting options. The hub is in a full industrial grade metal chassis and had a 2-pin terminal block for external power options.
The USBG-7U3ML1 is an USB 3.0 Hub that comply with the Universal Serial Bus 3.0 (USB3.0) Specifications Revision 1.0 and work up to 5Gbps. It provides 7 downstream facing ports with standard Type-A USB3.0 connectors.
USB Serial Adapter RS232 with 5Volt Output Option on Pin9 Selectable Via Jumper, Great for Barcode Scanners and POS devices. FTDI Chip with Windows 7 Drivers Supports Windows 7 and Vista (32 and 64-bit)
Premium mini switch for USB 2.0 peripheral sharing, this 2 to 1 high speed USB switch enables two PCs or Macs to share one USB device directly or through a USB hub where all devices can be shared. This is a simple 2 port switch solution for peripheral sharing.
The USBG-SSE1 is an Ethernet to RS-232 Serial Bridge. It may be used to connect any standard serial communications device such as a PC, an audio / video distribution system, etc., to an Ethernet network.
A USB Audio Converter that provides an amazing audio accessory for any computer with a USB port. It is equipped with standard input and output connectors to add a great stereo output performance.
Converts a USB port into a 9-pin x2 male RS-232 serial port capable of speeds up to 920,000 bps. The USB Serial Adapter is designed to make serial port expansion quick and simple.
USB 2.0 hard drive/optical drive external adapter with power implements a bridge between one USB port and one ATA or ATAPI based mass storage device port for 2.5, 3.5, and 5.25 drives.
Mini USB 2.0 to SATA adapter for all SATA and SATA II hard drives supports IDE optical drives, provides a serial ATA USB 2.0 interface for up to 480Mbps data transfer.
U2-SATA11 is an USB 2.0 to SATA bridge board. It has an USB high-speed device port and a SATA 1.5G host port. It received standard Mass Storage Device Class (MSDC) SCSI command from USB host and translate into ATA/ATAPI command to SATA device. The maximum throughput can goes up to 30MB/sec.
USB v2.0 5M (16FT) EXTENSION CABLE Specifications - Compliant with USB specificatin v2.0 - Active USB extension cable, assure good signal quality to meed USB specificatin - Extend up to 25m (serially connecting up to 5 segments), no signal degradation.
USB 2.0 A to Mini-B (4-pin) cable is perfect for use as a backup or for a direct replacement for your MP3 players, digital cameras or other portable devices.
USB to SATA and IDE and eSATA Adapter Cable Box with UL Listed and FCC Aproved Power Adapter. USBG-eSATA1 Works with: 2.5" IDE Drives (Hard Drives) 3.5" IDE Drives
USB parallel plus serial adapter cable connects to your computer to serve a dual function, connecting to a serial device for RS232 information transfer and use your printer connected to the parallel port simultaneously! Helps create an efficient working environment.
The USB to serial UART TTL adapter is auto sensing and is supported in Windows 10 or earlier OS and Mac OS and Linux. The serial UART adapter electronics automatically sense the voltage for its operation. Transmit and receive LED lights are embedded into the translucent USB molded jacket.
Reliability and a high performance FTDI Chip puts the GM-485422 USB to RS485, RS422 serial converter at the cutting edge of serial communication. With a terminal board connector included, this is a small, portable, and convenient solution.
This 3 ft. USB to Serial adapter is a tool of choice when supporting serial peripherals in newer computers without serial support. Now supported by Windows 11, this is an ideal solution for device support.
LED activity monitoring
Full support of RS-232 signals
USB bus powered
3ft. cable connection
5 volt output 2.5A for all SerailGear metal RS-232 USB adaters, SerialGear 4-port and 8-port USB serial adapter metal boxes. Will only work with 1/4 Inch 5V center positive devices.
5ft. male to female DB9 serial data cable for serial interface, DB9 Male to DB9 Female, 9 conductors (copper) with Foil Shield and Drain Wire ,Molded Cable.
Ultimate USB to SATA Hard Drive Adapter, IDE 2.5-in, IDE 3.5-in adapter. HI-speed USB 2.0 to Serial ATA (SATA) Drive and IDE Adapter prepares any Serial ATA (SATA) device (e.g. Hard Disk) or IDE device to be plugged into a USB 2.0.
NEW MODEL SUPPORTS 2.5inch and 3.5inch as well as 5.25inch HDD/CD/DVD. It is also Bundled with SATA to USB Adapter. USB To IDE 2.5-foot Cable With Power Adapter The USB 2.0 to IDE Drive Adapter implements.
Use our USB Serial Adapter for Steno Machines all you have to do is Look In Device Mgr. to see what Comport was assigned to the USB Serial Adapter, and change the com port settings on your CAT software.
12 inch USB to serial RS232 adapter with DB-9 male serial connector supports all Windows and Mac systems, uses your laptop or desktop to synchronize with existing devices. Whether your device is a slow speed logic control application, programming application or high-speed PDA/modem synchronization, our adapter will do the trick.
DB9 30 inch USB to serial adapter with RX/TX and power LED using Prolific Chip. No external power required and works strictly from the host computer type-A port.
Auto Select USB RS232 or RS422 or RS485 all in one Unit USB Pro Grade DB-9 Version USB to RS-232 / RS-422 / RS-485 Adapter The USB to serial interface adapter offers an easy way to connect a DB9 serial device to a USB port.
USB-to-Serial Industrial Adapter Dual Port DB-9 RS-232 USB to RS-232 Adapter Supports Windows 10, 8, 7 and Vista (32 and 64-Bit) - Metal case with DIN-Rail USB-2COM-M USB to Serial Adapter.
RS-422 and RS-485 USB to DB9 serial adapter with optical isolation and surge protection isolates its serial port with 2000 volt DC isolation and 25Kv ESD protection.
USB to RS232 serial adapter designed for industrial applications manufactured with a full metal chassis and included Din rail brackets. The serial adapter includes optical isolation of 2000V and 25KV of ESD protection.
The USBG-7U3ML1 is an USB 3.0 Hub that comply with the Universal Serial Bus 3.0 (USB3.0) Specifications Revision 1.0 and work up to 5Gbps. It provides 7 downstream facing ports with standard Type-A USB3.0 connectors.
The device switch allows 4 computers to share one device with a manual push button while maintaining USB 2.0 high speed, or HOT-Key selector via the provided sharing software. This USB port data switch includes (1) 5.0ft Long USB 2.0 certified cable.
Miniature 6 inch USB 3.0 cable for A to B connections allowing USB 3.0 devices such as printers, scanners, or hubs to connect directly, or to be used in combination with a USB extension cable. The very short USB 3.0 device cable is compliant with Super-Speed specifications with data transfer rates of up to 5Gbps.
The A right angle to B right angle cable keeps a low profile connection to both host and device port for USB 2.0 data activity. A great cable for connecting printers and scanners to your system via an A to B connection.
Flexible 10ft. A right angle to B right angle cable keeps a low profile connection to both host and device port for USB 2.0 data activity. A great cable for connecting printers and scanners to your system via an A to B connection.
The 3ft white A right angle to B right angle cable keeps a low profile connection to both host and device port for USB 2.0 data activity. A great cable for connecting printers and scanners to your system via an A to B connection.
The 6ft white A right angle to B right angle cable keeps a low profile connection to both host and device port for USB 2.0 data activity. A great cable for connecting printers and scanners to your system via an A to B connection.
The 10ft white A right angle to B right angle cable keeps a low profile connection to both host and device port for USB 2.0 data activity. A great cable for connecting printers and scanners to your system via an A to B connection.
Take advantage of the low profile connection to your device via the type-b port connector on this 10ft cable. The right angle of Type-B USB male connector allows for the same high-speed USB 2.0 data connection while shortening the length it would normally extend out.
Help prevent you host connection from accidental disconnect with this low profile Type-A to straight B USB 2.0 cable. Get the same high-speed data activity up to 480Mbps over its 3ft cable length. The cable is designed with black cabling for office or industrial use.
Help prevent you host connection from accidental disconnect with this white low profile Type-A to straight B USB 2.0 cable. Get the same high-speed data activity up to 480Mbps over its 6ft cable length. The cable is designed with white cabling for office or industrial use.
Share 1 USB device such as your USB printer or scanner with up to 4 computers, Easy to set up and use, the USB sharing switch uses a small icon in the system tray for switching. The USB 2.0 compatible switch offers a smart way to save time and effort in the office.
Black 8 inch USB A to mini-b device cable fully-rated USB-IF Certified Universal Serial Bus cables provide transfer rates up to 480Mbps depending on USB version.
The USBG-BAY4 is a 4 port DB-9 RS232 to USB serial adapter that is designed for PC, thin client, or server. It provides instant communication port expansion when using the Universal Serial Bus (USB). The USBG-BAY4 has excellent scalability and quickly adapts to new USB technologies.
USB to Serial CG-16COM-MINI 16-Port Industrial RS232 High Speed Serial Adapter is meant to be streamlined and adapted into your existing serial communication architecture. This USB 2.0 to RS232 Adapter is an intelligent expansion. The USB to Serial adapter is mountable to any 19 inch rack and uses screw lock mechanism connectors.
USB to RS-485 / RS-422 Converter contains an FTDI Chip with terminals photoelectric interface can convert the single ended USB signal into difference RS-422 or RS-485 signal. The converter includes Transient Voltage Suppressor technology!
The GM-FTDI-36 is a 3ft. long USB to RS-232 serial adapter that is compatible with most GPS or PDA. Use your office equipment like modems, scanners, and printers that make use of serial communication. No hassles with installation!
USB rack mount hub industrial-grade, 16 Port hub features a rugged metal enclosure with built In power adapter (UL and FCC Approved) and MTT hub controller. The USB rack mount hub is compliant with USB 2.0 and designed for the use in industrial application under tough working environments. It is suitable for DIN Rail Mounting.
