8 Port USB 2.0 Over IP Network Device Server Hub w/ Type-C & Type-A Ports

Introduction:

The US-S4PLUS USB 2.0 Over IP Network 8-Port Hub is a network-based USB Server for connecting four USB Type-A and four USB Type-C devices directly to the 10/100Mbps Ethernet network running TCP/IP. By adding this USB Server to LAN, you can network-enable the USB devices and break the traditional five meter (16.5 feet) USB cabling distance limitation. By this implementation, USB-A and USB-C devices connected to the 8-Port USB 2.0 Over IP Network Hub can be made available to remote clients over LAN. The USB 2.0 Over IP Network 8-Port Hub shares USB devices over the TCP/IP network, Share any USB device with others by using USB 2.0 networking hub.

Connect to any USB device anywhere on TCP/IP network. The USB to Ethernet Connector ensures hot Plug-and-Play installation including support for Isochronous devices. Share your USB device with others over local network using a single application. The USB 2.0 Over IP Network Hub will Auto-connect to new USB devices whenever they are plugged in. It also features network traffic encryption for sharing among secure devices.

Features:

• Allows USB Devices to be used and shared by client PCs over LAN.
• Supports wide variety of USB Type-A and Type-C devices.
• Supports Printer Auto Connect while sharing the printer to different client PCs.
• Compatible with bulk, interrupt and isochronous type USB devices.
• Provides Plug and Play function same as on board USB port.
• Access and monitor USB devices over a User-Friendly Application interface.
• Allows USB Devices to be used and shared by client PCs over LAN.
• Supports wide variety of USB devices.
• USB port supports over current protection.
• The NetUSB USB Server provides: RJ45 Ethernet to 8 USB ports.
• Supports IP addressing as Static or by DHCP.
• LEDs for system/Ethernet/USB ports.
• Field-upgradeable firmware.
• Supports Reset button for system reset.
• Supports Default button for configuration to default setting.

Specifications:

• The NetUSB USB Server provides: RJ45 Ethernet to 8 USB ports.
• 8 USB 2.0 High Speed Ports Type-A and Type-C up to 480Mbps speed.
• Full 500mA power provided to each USB port.
• 10BaseT/100BaseTx Fast Ethernet support.
• Input Voltage: +12V DC
• Compatible with Windows 7 / 8 / 10 / 11
• Regulatory approvals: FCC Class B (DoC) and CE.
• RoHS compliant.
• Operating Temperature: 0 to 55 °C (32 to 131 °F)
• Operating Humidity: 5 to 95% RH
• Storage Temperature: -20 to 75 °C (-4 to 167 °F)
• Safety Approvals: CE, FCC

Supported USB Devices:

• Cameras
• Scales
• Barcode Scanners
• Cash Registers
• IO Devices
• Scanners
• Webcams
• USB Hard Drives
• USB RAID
• USB Storage
• MULTI Function Printer Devices
• Multifunctionals
• Handhelds
• USB to Serial RS-232/422/485 Cables
• Card Readers
• Fingerprint Readers

*Surface Mounting screws not included.