7-Port USB 3.2 Gen 1 Hub PCBA

USB 3.2 Gen 1 USB hub board with ESD and surge protection. The Coolgear CG-2x3510S7-BOARD is a 5V DC input (self or bus powered), USB 3.2 Gen 1 hub circuit board for incorporating into equipment, assemblies, or a custom enclosure. It will support fast charging for Apple 1A/2.4A and Samsung Galaxy devices.

Each port is individually protected to help protect your peripheral investments. The USB 3.2 Hub component board uses a GL3510 chip. The GL3510 Hub controller chip features native fast-charging and complies with USB-IF battery charging specification rev1.2.

7-Port USB 3.2 Gen 1 Mini Hub Component Board Features

• Compliant with USB 3.2 Gen 1 Specification
• Upstream USB Type-B port supports Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
• 7 USB Type-A downstream ports support Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
• ESD protection per port:  ±15 kV(Air), ±15 kV(Contact)
• 1 control pipe and 1 interrupt pipe
• Backward compatible to USB specification 2.0/1.1
• Compliant with Battery Charging 1.2 Specification
• Downstream Type-A ports can be used as a Standard Downstream Port (SDP) or Charging Downstream Port (CDP) or Dedicated Charging Port (DCP)
• Downstream devices can be charged while upstream VBUS is not present, which can be applied to charger applications
• Over current protection on each downstream port
• Supporting Apple 1A/2.1A/2.4A and Samsung Galaxy devices fast-charging

Specifications:

• Hub Controller Chip: GL3510
• USB 3.2 Gen 1 Compliant
• Supports High Speed Full Speed and Super Speed transmit and Receive
• Complies with USB-IF Battery Charging revision 1.2
• Automatic switching between self-powered and bus-powered modes
• Built-in 5 to 3.3V and 5 to 1.2V regulator
• RISC-like architecture
• DC Barrel: 2.5mm Inner Diameter, 5.5mm Outer Diameter, Positive Polarity on Center Pin

Package Contents:

• USB 3.2 7-Port Hub Component Board